Hawg Halters Inc. 2018 Catalog


New HHI X-26 ® Bolt-On Neck Rake Kit vs HHI Short Neck Builder’s Kit

M 5


With the launch of the exciting New X-26 ® Bolt-On Neck Rake Kit, HHI now offers two complete custom kits to build a big wheel touring bike. The X-26 ® Neck Rake Kit used on this 2016 Street Glide

F ground clearance of 5.50 inches, trail of 6.40 inches, and a total rake of 38 degrees. It does not require extensions for 2014 - later model bikes, and features a dynamic multi-piece design that delivers maximum component assembly strength and unequalled secure attachment technology. The X-26 ® is fully air suspension compatible for all models and delivers outstanding performance and handling. Kits are available for Road Glide, Street Glide, and Road King from 1996 to present day models. N

is a true Bolt-On solution for the rider and custom builder alike.

The kit, designed and manufactured in the USA by HHI, delivers full suspension travel,




The HHI Short Neck Builders Kit used on this 2014 Street Glide utilizes a Radius Triple Tree design to allow the builder to stretch the bike out or drop it to the ground. This Short Neck Kit uses a patented

extension necessary to achieve proper chassis geometry, so your ride not only looks good, but handles great! To achieve this set up, a pair of 2 inch extensions are used in the 9 degree Triple Tree, which helps deliver a total rake of 42 degrees with a trail of 7.6 inches. The weld-on system is extremely strong, delivers an aggressive ride and is extensively used by custom builders everywhere. Kits are available for Road Glides, Street Glides, and Road Kings from 1996 to present day. All short neck kits are fully air suspension compatible.


Weld-On Neck Rake extension that should be installed by an experienced fabricator. This kit is designed to take


the guesswork out of determining the correct rake & fork


S T A R T W I T H T H E B E S T , B U I L D T H E B E S T .

Made with FlippingBook - Online magazine maker